Home Who We Are CRS Portal e-Certs Portal Employee Portal Customer Portal Contact Us
To Previous Page

Plain Dutch Weave is primarily used as a filter cloth. The openings slant diagonally through the cloth and cannot be seen by looking directly at the cloth. This weave has a coarser mesh and wire in the warp direction and a finer mesh and wire in the shute direction, giving a very compact, firm mesh with great strength.

Twilled Dutch Weave offers higher strength than regular Dutch weaves. It packs even more wires in a given area. Generally, this weave has finer mesh counts and lower flow than regular Dutch weaves and can be made to filter particles as fine as 2 microns in diameter.

STAINLESS STEEL - MICRON RATED

Warp x Shute
Warp & Shute
Inches
Nominal Micron
Retention
12 x 64 .023 / .0165 180
20 x 250 .0010 / .008 87
24 x 110 .014 / .010 115
30 x 150 .009 / .007 95
30 x 160 .009 / .007 90
30 x 250 .010 / .008 70
40 x 200 .007 / .0055 75
50 x 250 .0055 / .0045 60
80 x 700 .004 / .003 35
120 x 180 .004 / .0035 75
120 x 200 .004 / .0031 70
120 x 400 .0039 / .0026 40
120 x 600 .0039 / .0023 28
165 x 800 .0028 / .0020 25
165 x 1200 .0028 / .0016 19
165 x 1400 .0028 / .0016 14
200 x 600
.0024 / .0018
26
200 x 900
.0023 / .0016
23
200 x 1400
.0028 / .0016
10
250 x 1370
.0022 / .0015
8
250 x 1400
.0022 / .0015
8
250 x 1620
.0022 / .0015
7
325 x 1480
.0014 / .0012
7
325 x 1700
.0014 / .0012
6
325 x 1900
.0014 / .0011
5
325 x 2300
.0014 / .0010
5
325 x 2800
.0014 / .0010
4
375 x 2400
.0012 / .0009
4
400 x 2800
.0011 / .00078
2



Email: sales@gerarddaniel.com • www.gerarddaniel.com

GDW/Headquarters & Eastern Div. | GDW/Western Division
GDW/Canadian Division | GDW/European Division

Wire Cloth Products | Materials | Fabrication Services | Custom Weaving | Ordering Information | The Company | Home Again

copyright © 2007 Gerard Daniel Worldwide all rights reserved.