Separator Covers & Frames
Given the rigors of many production processes, separator covers and frames may require replacement from time-to-time.
It is possible to customize your existing machine by stacking frames in various configurations to address the special demands of your production process.
GDW’s round separator machine frames and round separator machine covers come in sizes ranging from 24″ to 60″. All standard frames are made from type 304 stainless steel and have a 2B finish. We offer a wide selection of frames listed below.
- Table Frame: The table frame is the bottom frame of the machine assembly that attaches directly to the motor table. All of GDW table frames come standard with a discharge dome, discharge spout, and nut for center tension device. (Pictured below)
- Spacing Frame: The spacing frame is located above the top screen on a machine. GDW’s spacing frames come standard with a discharge spout. (Pictured below)
- Distribution Frame: The distribution frame is located between screens on a machine to re-center material that passes through the upper screen to be efficiently separated by the lower screen. GDW’s distribution frame comes standard with a discharge spout, 4″ inspection port with white neoprene plug, and nut for a center tension devise. (Pictured below)
- Blank Frame: The blank frame has no dome, discharge spout, or inspection port.